Quantum - Atlas III

Below are all the different types of Quantum. Select the device of your choice, to download the manual

Contents

Quantum Atlas III Mounting Guidelines Mounting Guildelines The mounting holes on the Maxtor Atlas III 9 1 18 2GB hard disk drive allow the drive to be mounted in any orientation Figure 1 1 identifies the location of the three mounting holes found on each side of the drive and the four mounting holes found on the PCB side of the drive Dimensions given are in inches Mounting Screw Clearance Please note that the printed circuit board assembly PCBA is very close to the mounting holes For mounting 6 32 UNC screws are recommended Mounting screws should be no longer than 0 25 inches 6 25 mm and maximum torque applied to the screws must not exceed 14 inch pounds 1 57 N m clearance from the drive to any other surface except mounting surfaces must be a mi ...